Edge Grips

Items: 117 of 17
Show: 40
Drop items here to shop
Product has been added to your cart
  • Non-Adjustable Edge Grip with Disc for 1/8" Material (SO-AEGC-125)

    Non-Adjustable Edge Grip with Disc for 1/8" Material (SO-AEGC-125)

    Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $13.99
  • Non-Adjustable Edge Grip with Disc for 1/4" Material (SO-AEGC-250)

    Non-Adjustable Edge Grip with Disc for 1/4" Material (SO-AEGC-250)

    Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $14.99
  • Non-Adjustable Edge Grip with Disc for 3/8" Material (SO-AEGC-375)

    Non-Adjustable Edge Grip with Disc for 3/8" Material (SO-AEGC-375)

    Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $14.99
  • Non-Adjustable Edge Grip with Disc for 1/2" Material (SO-AEGC-500)

    Non-Adjustable Edge Grip with Disc for 1/2" Material (SO-AEGC-500)

    Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $15.99
  • Non-Adjustable Edge Grip with Cap for 1/8" Material (SO-AEGTC125-15)

    Non-Adjustable Edge Grip with Cap for 1/8" Material (SO-AEGTC125-15)

    Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation. These edge grips are available in four different sizes.

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $17.99
  • Non-Adjustable Edge Grip with Cap for 1/4" Material (SO-AEGTC250-15)

    Non-Adjustable Edge Grip with Cap for 1/4" Material (SO-AEGTC250-15)

    Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation. 

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $18.99
  • Non-Adjustable Edge Grip with Cap for 3/8" Material (SO-AEGTC375-15)

    Non-Adjustable Edge Grip with Cap for 3/8" Material (SO-AEGTC375-15)

    Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation. 

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $18.99
  • Non-Adjustable Edge Grip with Cap for 1/2" Material (SO-AEGTC500-15)

    Non-Adjustable Edge Grip with Cap for 1/2" Material (SO-AEGTC500-15)

    Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation. 

    Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.

    Not rated yet
    • $19.99
  • Cap for 1" Diameter Edge Grips (SO-CAP15)

    Cap for 1" Diameter Edge Grips (SO-CAP15)

    These caps can be used as a finishing cap for a range of our products including standoffs, edge grips and rod.

    Not rated yet
    • $5.99
  • Disc for 1" Diameter Edge Grips (SO-DISC2)

    Disc for 1" Diameter Edge Grips (SO-DISC2)

    These are replacement discs for the non-adjustable edge grips. When you need to change your graphics purchase these discs to replace your damaged ones.

    Not rated yet
    • $1.99
  • Square Adjustable Edge Grips 1" Diameter (SO-APEG-SQ9)

    Square Adjustable Edge Grips 1" Diameter (SO-APEG-SQ9)

    Square Adjustable Edge Grips add a unique touch to your installation without adding holes to the material. These edge grips hold up to 3/4″ thick material.


    Not rated yet
    • $26.99
  • Square Adjustable Edge Grips 1-1/4" Diameter (SO-APEG-SQ3)

    Square Adjustable Edge Grips 1-1/4" Diameter (SO-APEG-SQ3)

    Square Adjustable Edge Grips add a unique touch to your installation without adding holes to the material. These edge grips hold up to 3/4″ thick material.

    Not rated yet
    • $29.99
  • Double Adjustable Edge Grip 1" Diameter (SO-ADPEG9)

    Double Adjustable Edge Grip 1" Diameter (SO-ADPEG9)

    Our Double Adjustable Edge Grips  allow the material to be held on both sides without holes in your artwork or panels. These double adjustable edge grips are available in two sizes. Use these aluminum Double Edge Grips on your next project.

    Not rated yet
    • $18.99
  • Double Adjustable Edge Grip 1-1/4" Diameter (SO-ADPEG3)

    Double Adjustable Edge Grip 1-1/4" Diameter (SO-ADPEG3)

    Our Double Adjustable Edge Grips  allow the material to be held on both sides without holes in your artwork or panels. These double adjustable edge grips are available in two sizes. Use these aluminum Double Edge Grips on your next project.

    Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.

    Not rated yet
    • $19.99
  • Standard Adjustable Edge Grip 1" Diameter (SO-APEG9)

    Standard Adjustable Edge Grip 1" Diameter (SO-APEG9)

    Our aluminum Adjustable Edge Grips mount a variety of material thicknesses.  These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. Edge grips don’t require holes in your material and artwork or graphics can be easily changed out.

    1" diameter edge grip will hold material with a thickness of 1/8" - 1/2".

    Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.

    Not rated yet
    • $16.99
  • Standard Adjustable Edge Grip 1-1/4" Diameter (SO-APEG3)

    Standard Adjustable Edge Grip 1-1/4" Diameter (SO-APEG3)

    Our aluminum Adjustable Edge Grips mount a variety of material thicknesses.  These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. Edge grips don’t require holes in your material and artwork or graphics can be easily changed out.

    1-1/4" diameter edge grip will hold material with a thickness of 1/8" - 3/4".

    Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.

    Not rated yet
    • $19.99
  • Standard Adjustable Edge Grip 3/4" Diameter (SO-APEG75)

    Standard Adjustable Edge Grip 3/4" Diameter (SO-APEG75)

    Our aluminum Adjustable Edge Grips mount a variety of material thicknesses.  These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. Edge grips don’t require holes in your material and artwork or graphics can be easily changed out.

    3/4" diameter edge grip will hold material with a thickness of 1/8" - 1/4".

    Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.

    Not rated yet
    • $12.99