-
1" Diameter Adjustable Aluminum Edge Grip Standoff Kit
Want to display your best art and not have to drill holes? These complete Edge Grip Kits are just what you need!
Each kit comes with:
- (4) 1" diameter adjustable aluminum Edge Grips
- (4) All purpose, nylon wall anchors
- (4) Zinc plated, washer head screws
- Installation instructions
- Edge grips will hold material up to 1/2" thick
Note: Do not use edge grips for items weighing more than 55 pounds.
-
1-1/4" Diameter Adjustable Aluminum Edge Grip Standoff Kit
Want to display your best art, and not have to drill holes? These complete Edge Grip kits are just what you need!
Each kit comes with:
- (4) 1 1/4" diameter adjustable aluminum edge grips
- (4) All purpose, nylon wall anchors
- (4) Zinc plated, washer head screws
- Installation instructions
- Edge grips will hold material up to 3/4" thick
Note: Do not use edge grips for items weighing more than 55 pounds.
-
Wire Kit WSK-1: Top and Bottom Wall Mounts for 1/8” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/8” thick piece of material for vertical signs or displays. The WSK-1 includes two turnbuckle mounts (bottom mounts), two static upper mounts, two 10’ spans of 3/64” wire and four panel grippers. The turnbuckle and static mounts may be installed in a floor-to-ceiling configuration or be articulated to a 90-degree angle for a wall-to-wall installation. These kits also include mounting screws for the top and bottom mounts. * Please note that this kit does not include signage panels.
Includes:
- Two WS-A6B
- Two WS-A6
- Four WS-AEVG-125
- Two 10’ long 3/64” WS-Wire lengths
-
Wire Kit WSK-2: Top and Bottom Wall Mounts for 1/4” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/4” thick piece of material for vertical signs or displays. The WSK-2 includes two turnbuckle mounts (bottom mounts), two static, upper mounts, one 20’ span of 3/64” wire and four panel grippers. The turnbuckle and base mounts may be installed in a floor-to-ceiling configuration or be articulated to a 90-degree angle for a wall-to-wall installation. These kits also include mounting screws for the top and bottom mounts. * Please note that this kit does not include signage panels.
Includes:
- Two WS-A6B Top Mounts
- Two WS-A6 Bottom Mounts
- Four WS-AEVG-250 Vertical Grippers
- One 20’ long 3/64” WS-Wire length
-
Wire Kit WSK-3: Floor to Ceiling Mounts for 1/8” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/8” thick piece of material for vertical signs or displays. The WSK-3 includes two top mounts, two bottom mounts, one 20’ span of 3/64” wire and four panel grippers. Please note that this kit does not include signage panels.
Includes:
- Two WS-A1B Top Mounts
- Two WS-A1 Bottom Mounts
- Four WS-AEVG-125 Vertical Grippers
- One 20’ long 3/64” WS-Wire length
-
Wire Kit WSK-4: Floor to Ceiling Mounts for 1/4” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/4” thick piece of material for vertical signs or displays. The WSK-4 includes two top mounts, two bottom mounts, one 20’ span of 3/64” wire and four panel grippers. * Please note that this kit does not include signage panels.
Includes:
- Two WS-A1B Top Mounts
- Two WS-A1 Bottom Mounts
- Four WS-AEVG-250 Vertical Grippers
- One 20’ long 3/64” WS-Wire length
-
Wire Kit WSK-5: Drop Ceiling Suspension for 1/8” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/8” thick piece of material from a drop ceiling. The WSK-5 includes two acoustic panel t-track clips, one 10’ span of 3/64” wire and four panel grippers. * Please note that this kit does not include signage panels.
Includes:
- Two HD-DCLIP Drop Ceiling Clips
- Four WS-AEPG-125R Vertical Grippers (two attach to the HD-CLIP and two attach to signage)
- One 10’ long 3/64” WS-Wire length
-
Wire Kit WSK-6: Drop Ceiling Suspension for 1/4” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/4” thick piece of material from a drop ceiling. The WSK-6 includes two acoustic panel t-track clips, one 10’ span of 3/64” wire and four panel grippers. * Please note that this kit does not include signage panels.
Includes:
- Two HD-DCLIP Drop Ceiling Clips
- Two WS-AEPG-125R (attaches to the HD-DCLIP) Vertical Grippers
- Two WS-AEPG-250R Vertical Grippers
- One 10’ long 3/64” WS-Wire length
-
Wire Kit WSK-7: Ceiling Mounted Suspension for 1/8” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/8” thick piece of material from a solid ceiling. The WSK-7 includes two top mounts, 1 10’ span of 3/64” wire and two panel grippers. * Please note that this kit does not include signage panels.
Includes:
- Two WS-A1B Top Mounts
- Two WS-AEPG-125R Vertical Grippers
- One 10’ long 3/64” WS-Wire length
-
Wire Kit WSK-8: Ceiling Mounted Suspension for 1/4” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/4” thick piece of material from a solid ceiling. The WSK-8 includes two top mounts, one 10’ span of 3/64” wire and two panel grippers. * Please note that this kit does not include signage panels.
Includes:
- Two WS-A1B Top Mounts
- Two WS-AEPG-250R Vertical Gripper
- One 10’ long 3/64” WS-Wire length
-
Wire Kit WLK-9: Ceiling to Floor Mounts for 3/16” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 3/16” thick piece of material for vertical signs or displays. The WLK-9 includes two ceiling mounts, two floor mounts, two 10’ spans of 3/64” swaged wire and four panel grippers. These kits also include mounting screws for the floor and ceiling mounts. * Please note that this kit does not include signage panels.
Includes:
- Two WL-A40 Top Mounts
- Two WL-A41 Bottom Mounts
- Four WL-A45-188 Vertical Grippers
- Two 10’ long 3/64” Swaged Wire lengths
-
WLK-10: Ceiling to Floor Mounts for 1/4” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/4” thick piece of material for vertical signs or displays. The WLK-10 includes two floor mounts, two ceiling mounts, two 10’ spans of 3/64” swaged wire and four panel grippers. These kits also include mounting screws for the floor and ceiling mounts. * Please note that this kit does not include signage panels.
Includes:
- Two WL-A40 Top Mounts
- Two WL-A41 Bottom Mounts
- Four WL-A45-250 Vertical Grippers
- Two 10’ long 3/64” Swaged Wire lengths
-
Wire Kit WLK-11: Top and Bottom Wall Mounts for 3/16” Material
yford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 3/16” thick piece of material for vertical signs or displays. The WLK-11 includes four wall mounts, two 8’ spans of 3/64” swaged wire and four panel grippers. These kits also include mounting screws for the wall mounts. * Please note that this kit does not include signage panels.
Includes:
- Four WL-A42 Top or Bottom Mounts
- Four WL-A45-188 Vertical Grippers
- Two 8’ long 3/64” Swaged Wire lengths
-
Wire Kit WLK-12: Top and Bottom Wall Mounts for 1/4” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/4” thick piece of material for vertical signs or displays. The WLK-12 includes four wall mounts, two 8’ spans of 3/64” swaged wire and four panel grippers. These kits also include mounting screws for the wall mounts. * Please note that this kit does not include signage panels.
Includes:
- Four WL-A42 Top or Bottom Mounts
- Four WL-A45-250 Vertical Grippers
- Two 8’ long 3/64” Swaged Wire lengths
-
Wire Kit EZK-13: Floor to Ceiling System for 3/8” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 3/8” thick piece of material for vertical signs or displays. The EZK-13 includes two ceiling mounts, two floor mounts, four panel clips, one foot of plastic tubing insert, and two 15’ spans of 1/8” swaged. These kits also include mounting screws for the floor and ceiling mounts. * Please note that this kit does not include signage panels.
Includes:
- Two EZ-AH28-PO Top Mounts
- Two EZ-A28 Bottom Mounts
- Four EZ-A58-375 Panel Clips
- Two EZ-AWIRE15 Swaged Wire Packs
- Plastic Tubing
-
Wire Kit EZK-14: Floor to Ceiling System for 1/2” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/2” thick piece of material for vertical signs or displays. The EZK-14 includes two ceiling mounts, two floor mounts, four panel clips, one foot of plastic tubing insert, and two15’ spans of 1/8” swaged wire. These kits also include mounting screws for the floor and ceiling mounts. * Please note that this kit does not include signage panels.
Includes:
- Two EZ-AH28-PO Top Mounts
- Two EZ-A28 Bottom Mounts
- Four EZ-A58-500 Panel Clips
- Two EZ-AWIRE15 Swaged Wire Packs
- Plastic Tubing
-
Wire Kit EZK-15: Ceiling Mounted Suspension for 3/8” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 3/8” thick piece of material for vertical signs or displays. The EZK-15 includes two ceiling mounts, two vertical grippers, and two 10’ spans of 1/8” swaged wire. (Wire must be cut to length needed & one end must be crimped with appropriate tool). These kits also include mounting screws for the floor and ceiling mounts. * Please note that this kit does not include signage panels.
Includes:
- Two EZ-AH28-PO Top Mounts
- Two EZ-AH43-375PO Vertical Panel Clips
- Two EZ-AWIRE10 Swaged Wire Packs
-
Wire Kit EZK-16: Ceiling Mounted Suspension for 1/2” Material
Gyford Wire Kits are a great way to get started with wire suspension for your signage and display projects. This comprehensive collection includes all the hardware for mounting a 1/2” thick piece of material for vertical signs or displays. The EZK-16 includes two ceiling mounts, two vertical grippers, and two 10’ spans of 1/8” swaged wire. (Wire must be cut to length needed & one end must be crimped with appropriate tool). These kits also include mounting screws for the floor and ceiling mounts. * Please note that this kit does not include signage panels.
Includes:
- Two EZ-AH28-PO Top Mounts
- Two EZ-AH43-500PO Vertical Panel Clips
- Two EZ-AWIRE10 Swaged Wire Packs
-
Fixed Panel Hinge 1" Diameter (SO-A1H)
Fixed Aluminum Panel Hinge have lockable positioning and are available in two sizes. StandOff Panel Hinges hold two pieces of material at separate angles. They can be locked in place and fastened to your material with a cap or gripper. Once the hinges are fixed into the selected position, other StandOff components can be attached as needed. These hinges are an excellent solution for expanding the versatility of a design.
Use with our standard aluminum caps for a finished look. Cap SO-CAP9 is compatible with this hinge.
-
Fixed Panel Hinge 1-1/4" Diameter (SO-A125H)
Fixed Aluminum Panel Hinge have lockable positioning and are available in two sizes. StandOff Panel Hinges hold two pieces of material at separate angles. They can be locked in place and fastened to your material with a cap or gripper. Once the hinges are fixed into the selected position, other StandOff components can be attached as needed. These hinges are an excellent solution for expanding the versatility of a design.
Use with our standard aluminum caps for a finished look. Cap SO-CAP3 is compatible with this hinge.
-
Neoprene Wrench
Use our HD-NW neoprene wrench to grip and tighten low profile caps.
-
Security Cap Tool (HD-SCT)
The HD-SCT is a 3/32″ steel pin used to tighten security caps.
-
Non-Adjustable Edge Grip with Disc for 1/8" Material (SO-AEGC-125)
Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Disc for 1/4" Material (SO-AEGC-250)
Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Disc for 3/8" Material (SO-AEGC-375)
Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Disc for 1/2" Material (SO-AEGC-500)
Non-Adjustable Edge Grips with a Permanent Cap allow you to mount graphics without the need for holes in your material. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. These Non-Adjustable Edge Grips are best for permanent installations. These Edge Grips with a Adhesive Disc is available in four different sizes.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Cap for 1/8" Material (SO-AEGTC125-15)
Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation. These edge grips are available in four different sizes.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Cap for 1/4" Material (SO-AEGTC250-15)
Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Cap for 3/8" Material (SO-AEGTC375-15)
Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Non-Adjustable Edge Grip with Cap for 1/2" Material (SO-AEGTC500-15)
Non-Adjustable Edge Grip with removable threaded caps are great for temporary installation as the cap can be removed and the material can be changed without damaging or modifications to your material or surface. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for any holes in your material for installation.
Mounting Tip: Installation hardware for counterbored hold sold separately. See our Hardware (click here) section for available options.
-
Cap for 1" Diameter Edge Grips (SO-CAP15)
These caps can be used as a finishing cap for a range of our products including standoffs, edge grips and rod.
-
Disc for 1" Diameter Edge Grips (SO-DISC2)
These are replacement discs for the non-adjustable edge grips. When you need to change your graphics purchase these discs to replace your damaged ones.
-
Square Adjustable Edge Grips 1" Diameter (SO-APEG-SQ9)
Square Adjustable Edge Grips add a unique touch to your installation without adding holes to the material. These edge grips hold up to 3/4″ thick material.
-
Square Adjustable Edge Grips 1-1/4" Diameter (SO-APEG-SQ3)
Square Adjustable Edge Grips add a unique touch to your installation without adding holes to the material. These edge grips hold up to 3/4″ thick material.
-
Double Adjustable Edge Grip 1" Diameter (SO-ADPEG9)
Our Double Adjustable Edge Grips allow the material to be held on both sides without holes in your artwork or panels. These double adjustable edge grips are available in two sizes. Use these aluminum Double Edge Grips on your next project.
-
Double Adjustable Edge Grip 1-1/4" Diameter (SO-ADPEG3)
Our Double Adjustable Edge Grips allow the material to be held on both sides without holes in your artwork or panels. These double adjustable edge grips are available in two sizes. Use these aluminum Double Edge Grips on your next project.
Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.
-
Standard Adjustable Edge Grip 1" Diameter (SO-APEG9)
Our aluminum Adjustable Edge Grips mount a variety of material thicknesses. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. Edge grips don’t require holes in your material and artwork or graphics can be easily changed out.
1" diameter edge grip will hold material with a thickness of 1/8" - 1/2".
Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.
-
Standard Adjustable Edge Grip 1-1/4" Diameter (SO-APEG3)
Our aluminum Adjustable Edge Grips mount a variety of material thicknesses. These StandOffs provide a way to mount signs, graphic panels and architectural panels to various surfaces without the need for drilling through the panel. Edge grips don’t require holes in your material and artwork or graphics can be easily changed out.
1-1/4" diameter edge grip will hold material with a thickness of 1/8" - 3/4".
Watch our installation video below where our tech lead will teach you how to install Adjustable Edge Grips.