Panel Grippers

The EZ Panel Gripper is designed to hold material in place with a nylon tip set screw.

Includes HD-NT4 mounting hardware.

The EZ Panel Gripper is designed to hold material in place with a nylon tip set screw.

Includes EZ-NT4 mounting hardware.

The EZ Panel Gripper is designed to hold material in place with a nylon tip set screw.

Includes HD-NT3 mounting hardware.

The EZ Panel Gripper is designed to hold material in place with a nylon tip set screw.

Includes HD-NT3 mounting hardware.

The EZ Panel Gripper is designed to hold material in place with a nylon tip set screw.

Includes HD-NT3 mounting hardware.

The EZ Replacement Saddle Gripper is designed to hold material in place with a nylon tip set screw

Includes HD-NT8, HD-CP3, SL-CP mounting hardware.

The EZ Replacement Saddle Gripper is designed to hold material in place with a nylon tip set screw

Includes HD-NT8, HD-CP3, SL-CP mounting hardware.

The EZ Replacement Saddle Gripper is designed to hold material in place with a nylon tip set screw

Includes HD-NT7, HD-CP3, SL-CP mounting hardware.

The EZ Replacement Saddle Gripper is designed to hold material in place with a nylon tip set screw

Includes HD-NT7, HD-CP3, SL-CP mounting hardware.

The Standoff Panel Gripper with Mounting Plate assembly is designed to hold  panels. This Standoff Gripper holds panels 1/4″ thick in any direction. The 2-1/2″ mounting plate uses three #8 oval head screws (included) and may require 3/8″ holes in your panel.

The Standoff Panel Gripper with Mounting Plate assembly is designed to hold  panels. This Standoff Gripper hold panels 3/8" thick in any direction. The 2-1/2″ mounting plate uses three #8 oval head screws (included) and may require 3/8″ holes in your panel.

The Standoff Panel Gripper with Mounting Plate assembly is designed to hold  panels. This Standoff Gripper holds panels 1/2" thick in any direction. The 2-1/2″ mounting plate uses three #8 oval head screws (included) and may require 3/8″ holes in your panel.

The Standoff Panel Gripper with Mounting Plate assembly is designed to hold  panels. This Standoff Gripper holds panels 3/4" thick in any direction. The 2-1/2″ mounting plate uses three #8 oval head screws (included) and may require 3/8″ holes in your panel.

The Standoff Panel Gripper is designed to hold panels. This gripper is mounted with 5/16-18 threaded hardware which is not included and may require 3/8″ holes in your panel.

Grippers can be mounted directly to a surface or used with a mounting plate. Gripper can be used with our other lines EZ-Rod & Wire or StructureLite profile.

Mounting Tip: For attaching a gripper to a barrel, use a 5/8″ diameter barrel for SO-AGR-250 to 500 or a 1″ diameter barrel for SO-AGR-750.

The Standoff Panel Gripper is designed to hold panels. This gripper is mounted with 5/16-18 threaded hardware which is not included and may require 3/8″ holes in your panel.

Grippers can be mounted directly to a surface or used with a mounting plate. Gripper can be used with our other lines EZ-Rod & Wire or StructureLite profile.

Mounting Tip: For attaching a gripper to a barrel, use a 5/8″ diameter barrel for SO-AGR-250 to 500 or a 1″ diameter barrel for SO-AGR-750.

The Standoff Panel Gripper is designed to hold panels. This gripper is mounted with 5/16-18 threaded hardware which is not included and may require 3/8″ holes in your panel.

Grippers can be mounted directly to a surface or used with a mounting plate. Gripper can be used with our other lines EZ-Rod & Wire or StructureLite profile.

Mounting Tip: For attaching a gripper to a barrel, use a 5/8″ diameter barrel for SO-AGR-250 to 500 or a 1″ diameter barrel for SO-AGR-750.

The Standoff Panel Gripper is designed to hold panels. This gripper is mounted with 5/16-18 threaded hardware which is not included and may require 3/8″ holes in your panel.

Grippers can be mounted directly to a surface or used with a mounting plate. Gripper can be used with our other lines EZ-Rod & Wire or StructureLite profile.

Mounting Tip: For attaching a gripper to a barrel, use a 5/8″ diameter barrel for SO-AGR-250 to 500 or a 1″ diameter barrel for SO-AGR-750.

The WL Panel Gripper is an aluminum gripper that holds material. Material is secured with a nylon tip set screw and the clip attaches to a capstan connection pin with a cone point set screw. The WL-CCP capstan connection pin allows attachment to any Gyford StandOff Systems® part tapped in 5/16-18.

Included hardware: WL-188C, HD-CP1, HD-NT0

The WL Panel Gripper is an aluminum gripper that holds material. Material is secured with a nylon tip set screw and the clip attaches to a capstan connection pin with a cone point set screw. The WL-CCP capstan connection pin allows attachment to any Gyford StandOff Systems® part tapped in 5/16-18.

Included Hardware: WL-250C, HD-CP2, HD-NT0

The WL Panel Gripper is an aluminum gripper that holds material. Material is secured with a nylon tip set screw and the clip attaches to a capstan connection pin with a cone point set screw. The WL-CCP capstan connection pin allows attachment to any Gyford StandOff Systems® part tapped in 5/16-18.

Included Hardware: WL-375C, HD-CP2, HD-NT0